Scroll Top

WHIRLPOOL (or BAUKNECHT) DRYER STOPPED WORKING?

HAS YOUR BAUKNECHT / WHIRLPOOL DRYER STOPPED WORKING?

Problem description:

  • Your machine does not work at all. No lights, no ‘beeps’.
  • The power cord is connected to an outlet and the outlet has power.
  • You did not experience problems before with the machine.

If this matches your situation, the PCB of your machine might be out of order.

TRKA-Koblenz-4580_856010512020_320x320

In your case, a new PCB would cost between € 165 and € 250.
But don’t worry. I can repair PCB for you.

foto

What should you do?

Double-check if the machine is realy out of order
Before you signup for repair, first double-check whether your machine realy has a defect. So no more lights or beeps when you switch the machine on – and check whether there is voltage on the outlet.

Signup for repair
If the machine still doesn’t work, then you can signup for repair.

How to dis-assemble the PCB
(old model)

Bauknecht printplaat reparatie De witgoedmonteur

Take the water collection tank from the machine, and loosen the 3 torx screws. Remove the top from the machine by unscrewing 3 Torx screws on the back.

Wasdroger printplaat reparatie whirlpool
Bauknecht dorger print reparatie

Unscrew 2 torx screws on the top left and right of the control panel and release the spring clips.

Pull the entire control panel forward and click the module loose.

Wasdroger pintplaat reparatie

Disconnect all plugs. Pack the panel in a sturdy box!

How to dis-assemble the PCB
(new model)

For example AWZ7777

TRKA-Koblenz-4580_856010512020_320x320

Take the water condensate tray from the machine, and loosen the torx screw.

IMG_5057

Remove the top from the machine by unscrewing 3 torx screws on the back and sliding the blade backwards.

IMG_5054

Now release the 2 spring clips of the PCB so that it comes loose.

IMG_5055

Then unscrew left and right the front screws indicated by the blue arrow.

To tilt the panel, the plastic spring clip (red arrows) must be released. Seen from before, the left side is very difficult through the slot on the top.

IMG_50580pijl

Then tilt the bottom of the panel towards you, creating a flap that opens upwards and click the PCB further.

Disconnect all plugs. Pack the panel in a sturdy box!

We repair – among others – to the following models:

AWZ 7556 WP
AWZ 7777 WP
AWB866
AWB615
GREEN850
Care Motion 825 A2+
TKPRIME82A2
TRKAEC6590
TRKDECO5580
TRKD3580
TRKA4580
TRKA4590
TRKD5580
TRKA6580
TRKD9590

Privacy Preferences
×

Hallo!

Klik hieronder om direct via WhatsApp te chatten of stuur een email naar info@deprintplaatmonteur.nl

Hi!

Please click below to chat with us on Whatsapp or send an email to info@deprintplaatmonteur.nl

× Stuur WhatsApp bericht